Categories

False alarms and system hiccups can be frustrating, and even more concerning, may prevent your home security system from working the way it should. Thankfully, most troubles, from false alarms to dead batteries, are easy to fix. Check out our recommendations for troubleshooting your home alarm system in Tyler. We’ll help keep your family members safe and your system operating smoothly.

Test Your Home Security System In Tyler

One of the most sensible ways to troubleshoot your home’s security is to test it! Modern systems let you place them in test mode to keep you from prompting an emergency response from monitoring agents. After moving to test mode, do the following:

• Turn on your system as you typically would when going out.
• Open a door or window protected by a contact sensor, or test other sensors. Shut the door or window once you’re finished so it doesn’t trip the alarm as you get out of test mode.
• Let the alarm resonate for 60 seconds to make sure a message is dispatched to the security company and an entry is created in the alarm system log.
• Proceed to test devices as needed
• Review the alarm’s activity log to verify functionality.

Don’t worry, monitoring agents will be aware that your system is undergoing a test. Be sure to switch off test mode when done. It’s wise to test monthly or anytime you make changes to your home’s phone or internet connectivity.

Check The Position And State Of Motion Sensors

Although an integral aspect of your alarm system, motion sensors are notorious for false alarms. Prevent them with a few simple troubleshooting steps.

• Perform a visual inspection. Are there things that could shift within the path of the sensor, like drapery blown in a breeze?
• Is the sensor dirty? Dirt, cobwebs, and debris can cause poor performance. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can turn on? Some models can be programmed to ignore pets weighing up to 100 pounds.
• When was the battery replaced? A low battery can impact performance or lead to false alarms.
• Is the sensor facing a heat source? Too much heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Watch Out For Low Battery Signals

One of the great things about modern home security systems is that they’ll tell you when batteries are getting low. If your system has a smartphone app or control panel, you’ll often find notifications there. Depending on the alarm, you might hear an occasional beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless devices have batteries that should be replaced every so often. It’s a good idea to keep batteries around and establish a replacement schedule. Some systems also include a backup battery for the main control panel. This battery keeps your system running if you have a power outage and should recharge itself once the electricity is working again. If it doesn’t, you will need to replace it.

Troubleshooting Is Effortless With ADT Home Security In Tyler 

As the foremost name in home security, ADT builds systems that supply superior functionality and protection. Accessing test mode is straightforward through MyADT.com or the ADT+ app, and you’ll always receive notifications when a sensor battery is low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Tyler home. Place a call to (903) 231-9117 or submit our form today!